In 1997 AP800s replaced AP700s, introduced in 1994, as the power amplifiers supplied to drive the mid and high frequency components of every active Q-Series Quested system. The low frequency performance of the AP800 is excellent and the amplifier was also used to drive the bass sections of the Q-Series until the introduction of the AP1300 in 1996.
The AP800 is the perfect choice of amplifier to drive the passive H108 and VH2108 monitors.
Size: (WxHxD) 480mm(w) x 88(h) x 410(d) (3U)
Weight: 22 kgs
Output power (Watts RMS) per channel:
•8 ohms @ 1 kHz 425
•4 ohms @ 1 kHz 750
•2 ohms @ 1 kHz 1200
Mono Bridged:
•8 ohms @ 1 kHZ 1500
•4 ohms @ 1 kHZ 2300
THD @ rated power:
•4 ohms 1 kHz 0.005%
•20Hz - 20KHz 0.03%
Input impendance (actively balanced): 10k ohms
Frequency response: 20Hz - 20KHz +0/-0.5 dB
Damping factor 1 kHz, 8 ohms: >400
Sensitivity for rated output, 4 ohms: +7dBm, signal
Gain: 33dB
Hum & Noise: -105 dB
Input CMRR: >90dB
Power requirements: 230 VAC @ 10.0 amps max, or 120 VAC @ 20.0 amps max
Home | Gear | This Just In! | Swag | The Black Pages
|
|
Unauthorized reproduction is prohibited by law, subject to criminal prosecution, and just not cool.
Mercenary© US Pat & TM off.