Mercenary Audio
Purple Audio LilPEQr 2 Band Program EQ



The LILPEQr is our take on the classic program (aka final mix) equalizer. It offers high and low frequency shelving bands, each with three carefully selected corner frequencies to choose from, and a switchable fader knob for overall level control.

The LILPEQr emulates the colorful 3D richness and useful responses of our favorite vintage tube (aka valve) program EQs (namely, the Lang PEQ-1 and the Klangfilm RZ062), but in a compact, solid-state format. The LILPEQr will add air, weight, and glue to an already balanced mix. Additionally you can also use the LILPEQr to immediately and intuitively alter the overall tone of an individual source.

When the EQ is first switched in (center switch position - "IN" - LED off) your signal is injected passively into the tone network, directly following the input transformer. As with many classic program equalizers, this configuration allows for the ultimate in wide, lush, mix-buss response with extra "glue" and all that richness.

Flip the switch one more click (upper switch position - "IN+Level" - LED red) to activate the buffered "Level" control. Placed in between the input transformer and EQ network, these discrete, class A buffers change the response ever so slightly, making the signal seem a bit tighter and more focused. This mode is more useful on individual sources within a mix.

Relay true bypass (lower switch position - "BYP" - LED green) allows for easy before and after EQ comparisons, and a simple overall circuit path allows for wide bandwidth so that everything passes through... sounding better! In program mode ("IN"), with both EQ knobs centered, frequency response is +/- 0.5dBu from 20Hz to 20kHz, and extends below 10Hz and well beyond 120kHz before any drooping occurs.

Mixwell says,
"I've been using these EQ's all over the place for several months now and I've found that the AIR Band on the LILPEQR [28.5K] has a very distinctive effect good for use with single elements and over an entire mix. I like it very much for bumping ribbons up top so they cut through the mix more, but without any harshness or spit. These equalizers have been life savers for dark sources and adding "girth" to the overall balance. You can make sounds very dense in the bottom and give things a "blooming" type of quality. When using AIR Band, it brings a very "atmospheric" feeling to the high mid that I find particularly cool sounding."
-A/B

PURPEQ List $0.00

Mercenary $625.00


email to a friend

    
Features:

• Big sound, small package
• Major vibe, minimal interface
• High Frequency shelf boost/cut 12dB at 5kHz, 10kHz, or 28.5kHz ("AIR")
• Low Frequency shelf boost/cut 20db at 50Hz, 80Hz, or 160Hz
• Switchable, buffered level control for overall volume adjustment
• Relay True Bypass
• Tricolor LED level meters
• Transformer balanced in and out, with bridging 20kΩ input
• 100% Class A, discrete signal path
• Current consumption: 60mA
• Over Current Resettable Fused (prevents any module problem from affecting your rack)
• ROHS - Lead Free

LILPEQ-R Pinout:


• Pin 1: Chassis Ground
• Pin 2: Output A +
• Pin 3: Output B + (mult from pin 2)
• Pin 4: Output A -
• Pin 5: Audio Ground
• Pin 6: Output B- (mult from pin 4)
• Pin 7: Input -
• Pin 8: Input -
• Pin 9: Input +
• Pin 10: Input +
• Pin 11: NC
• Pin 12: +15 or 16VDC 60ma
• Pin 13: Audio Ground
• Pin 14: -15 or 16VDC 60ma
• Pin 15: NC (+48VDC)




PURPEQ List $0.00

Mercenary $625.00








Home | Gear | This Just In! | Swag | The Black Pages


Search for gear by name or application
© 2012 Huckleberry Music Corp. All rights reserved.
Unauthorized reproduction is prohibited by law, subject to criminal prosecution, and just not cool.
Mercenary© US Pat & TM off.