The VT-3 is a dual-channel, all-triode vacuum tube DI for recording electric or electronic instruments. The inputs are designed to provide the proper load impedance for all instruments that have a 1/4-inch phone jack output.
D.W. Fearn VT-3 features
The outputs of the VT-3 are mic level (150 ohm source impedance at a nominal -30dBV). The VT-3 is designed to operate into a high-quality microphone preamplifier like the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers.
Operation is very simple: plug the instrument into the 1/4" front panel jack and take the output either from the front panel XLR connector, or a parallel XLR connector on the back panel. A second 1/4”"jack provides an output to feed a guitar amplifier when necessary. A ground-lift switch helps eliminate ground loop buzz, and a switchable high-pass filter gently rolls off frequencies below 100Hz when required.
The two channels are entirely independent and can be used with two different instruments at the same time.
Home | Gear | This Just In! | Swag | The Black Pages
|
|
Unauthorized reproduction is prohibited by law, subject to criminal prosecution, and just not cool.
Mercenary© US Pat & TM off.