The Avenson Audio "Small DI" [at only 3.25" long it's not much bigger than an XLR connecter] is a little box with a big sound. The Small DI has a very high impedance input FET buffer inside designed for wide bandwidth and clean reproduction. The buffer circuit runs on +48V phantom power and is unity gain. One of the best features of the Small DI is that it comes before the preamp, so that your input signal uses all the electronics of the preamp. The Small DI is also the perfect accessory for microphone preamps that don't have a DI. Its also great for preamps that put the DI input in an inconvenient place like the back of the unit.
Avenson Small Di Features
The Small DI has a very high impedance input FET buffer inside designed for wide bandwidth and clean reproduction. The buffer circuit runs on +48V phantom power and is unity gain.
One of the best features of the Small DI is that it comes before the preamp, so that your input signal uses all the electronics of the preamp. The Small DI is also the perfect accessory for microphone preamps that don't have a DI. Its also great for preamps that put the DI input in an inconvenient place like the back!
It's not much bigger than an XLR connecter and at only 3.25" long it fits anywhere unobtrusively. The red LED tells you when phantom is turned on making last minute troubleshooting easier.
SPECIFICATIONS:
- Topology: Transformerless FET
- Input Impedance: 10 MΩ
- Input Overload Level: +8 dBu at 1% THD
- Gain: -0.2 dB
- Frequency Response: 10 Hz - 100 kHz (+0/-0.25 db)
- Signal to Noise (A-weighted): ≥108 dB
- Output Impedance: 150Ω (load ≥ 1kΩ )
- Power Requirements: P48 phantom power (~5 mA)
Home | Gear | This Just In! | Swag | The Black Pages
|
|
Unauthorized reproduction is prohibited by law, subject to criminal prosecution, and just not cool.
Mercenary© US Pat & TM off.