An exceptionally cool compliment to any 200 series module frame collection, the noise gate / expander features the classic API tone we have all come to know and love with the ability to increase the dynamic range of a signal... cut off reverb trails and/or eliminate background noise. While not the only reason to pick up a compliment of 200 series modules, a worthwhile addition should you have some additional slots in your frame!
API 235L features
The API 235L Noise Gate/Expander is one of the fastest noise gates manufactured today. When an engineer is faced with program material with a high level of background noise, the 235L can either Gate the signal at a preset Threshold, or with the use of the Expander function, can reduce the background noise to an almost undetectable level. This can be achieved without the typical loss of the program material caused by slow triggering of the signal, or "pinging" caused by false triggering.
With a wide range of adjustment, the 235L can operate from -45 to +25 dBu, fitting into any audio situation regardless of program level. Once the Threshold level is set, the Attack time can be selected to react faster than 100 micro seconds or slightly slower than 25 milli-seconds to reduce false triggering. Although the Depth control has a full range of -80 dB, the scale is expanded in the first half of rotation so 0 to 9 dB is available for fine tuning of subtle, undetectable gating. The second half of rotation is from 10 to 80 dB for more drastic noise reduction.
The Expander function is a 1:2 ratio, allowing the signal to "sneak up" to the full signal level without any loss of "under threshold" nuances of vocals and percussion. Setting the threshold in the Gate function to the desired level, then switching to the Expander mode is the perfect setup.
For special gating functions such as the famed "gated snare reverb", the Release function can be switched to Hold, and the Release control becomes the Hold time. In both functions, the unselected one has a set time of 100 m/sec.
When used with the other 200L series modules, a complete input strip can be built from input through dynamics, equalization, and final output.
The 235L makes use of the 2510 and 2520 op-amps and therefore exhibits the reliability, long life, and uniformity which are characteristic of API products.
- Threshold control from -45 to +25 dBu
- Variable Fine Adjustable Depth to -80dB
- Adjustable Release/Hold Time, 50m/sec to 3 sec.
- 2:1 Expander or Noise Gate Selection
- Release or Hold Switch for Release control knob
- Always at Unity Gain, Regardless of settings
- Uses the API 2510 and API 2520 Op-Amps
- Transformer Output, to +28dBu
SPECIFICATIONS
- Threshold Range: -45dbu to +25 dBu
- Depth Range: 0 to -80dB, Fine adjust control, -9 at 50% rotation
- Attack Time: Fast=100u/sec, Normal=25m/sec, gate at 90% open
- Release Time/Hold Time: 50 m/sec to 3 sec.
- Input Impedance: >10K Ohms, Un-Balanced
- Output Impedance: 85 Ohms, Transformer coupled, Balanced
- Nominal Levels: -45 dBu to +20 dBu
- Clipping Level: +28 dBu
- Frequency Response: 0, -.3, 30 to 20kHz
- Noise: Gate Closed: -102 dBu, Unweighted Gate Open: -90 dBu UnWeighted.
- Distortion: Gate Open: -40 dBu=.3%THD, -30=.1%, -20=.03%, -10=.01%, +4=.008%, +12=.01%, +28=.1%
- Connectors: .100 spaced ELCO
- Power Consumption: 16 VDC, 100 mA max @ +24 dBu
RACK FRAME AND POWER SUPPLY OPTIONS
Home | Gear | This Just In! | Swag | The Black Pages
|
|
Unauthorized reproduction is prohibited by law, subject to criminal prosecution, and just not cool.
Mercenary© US Pat & TM off.