The Manley all-tube microphone preamplifiers are available in 2-channel or single channel versions, both selectable from 40 to 60 dB of gain. These are primarily intended for use with modern capacitor (condenser) microphones.
- Manley input & output transformers with nickel laminations in mu-metal cases
- Flat frequency response from 10Hz-60KHz
- Mic input phase reverse switch
- 2400 ohm mic input Z; 48V phantom power built-in
- Hi-Z (100Kohm) 1/4" direct input
- Noiseless conductive plastic input attenuators
- <0.05% THD @ 1Khz S/N ratio: 80dB
- EIN: -125dB
- Adjustable feedback / gain switch selects 5dB steps between 40 to 60 dB of gain
- Hi-current drive <50 ohm LO-Z 1/4" & XLR outputs
- Auto mute w/ warm-up delay for power up/down
- Max. input (with input pad fully open): 450mV
- Max. output: +32dBu
- Max. output (into 600 ohm load): (+15dBm)
- Power consumption (120/240VAC): 18/36 watts
- Dimensions: 19" x 1 3/4" x 10" (occupies 1u)
Home | Gear | This Just In! | Swag | The Black Pages
|
|
Unauthorized reproduction is prohibited by law, subject to criminal prosecution, and just not cool.
Mercenary© US Pat & TM off.